Error[C119] Unclosed comment started in

Модераторы: pip, gurzzza, _sva_, Alis, pip, gurzzza, _sva_, Alis, pip, gurzzza, _sva_

Ответить
addi
Сообщения: 14
Зарегистрирован: 29 сен 2021, 09:10
Предприятие: addico

Error[C119] Unclosed comment started in

Сообщение addi » 18 мар 2022, 09:28

Здравствуйте!

Подскажите пожалуйста, чтото застрял на пустом месте
Есть main:

Код: Выделить всё

#include "uart.h"
#include <stdlib.h>
#include <string.h>
//#pragma CCB 0xCE
volatile unsigned char temp;
extern unsigned char ByteReceived;
extern unsigned char status_uart ;
volatile unsigned char sts, cntb, cmd, tr_s,i, cntglob;
volatile char* data1 = 0;
volatile char* data2 = 0;
volatile char* data3 = 0;
volatile char* data4 = 0;
volatile char* data5 = 0;
volatile unsigned int adr = 0x8000;
volatile char* strres ;
volatile char cmd1[] = "!01-SPU-1000\r";
volatile char cmd2[] = "!02-SPU-1000\r";
volatile char reccmd1[] = "$01M\0";
volatile char reccmd2[] = "$02M\0";
volatile char toend[] = ">AA\0";
volatile unsigned char pref=0, aa=0,b=0,dd=0,n=0,d=0;

//volatile char reccmd3[] = "$01M\0";
//volatile char reccmd4[] = "$02M\0";
//extern unsigned char ByteReceived;
void main()
{
        unsigned char c;

        ///

        IOPORT1 = 0x00;
        IOPORT2 = 0x00;
        IOPORT3 = 0x00;
        IOPORT4 = 0x00;

        //

        IOPORT1 = 0xFF;
        IOPORT2 = 0xFF;
        IOPORT3 = 0xFF;
        IOPORT4 = 0xFF;
           ///*(volatile short*)(adr) = 0x00;
        ///
        IOPORT2 &= ~0x80;
        IOPORT1 &= ~0xFF;
        USART0_Init(SP_MODE_1);
        IOPORT2 &= ~0x80;
        _ei_();
        ByteReceived = 0;
        temp = 0;
        status_uart =0;
        IOPORT1 = 0xFF;
        cntglob = 0;
        data1 = malloc(sizeof("$AAM\r\0"));
        data2 = malloc(sizeof("#AABDD\r\0"));
        data3 = malloc(sizeof("@AABND\r\0"));
        data4 = malloc(sizeof("@AA1\r\0"));
        data5 = malloc(sizeof("@AA2\r\0"));
   while(1)
   {
       
        if(temp == 1)
        {       
                if((ByteReceived == 0x24) && (ByteReceived != 0x0D))
                {

                        IOPORT1 = 0x0F;
                        sts = 1;
                        *(data1+ cntb) = ByteReceived;
                        cntb++ ;
                     
                }
                else
                {
                        if((sts==1) && (ByteReceived == 0x0D))
                        {
                                *(data1 + cntb) = '\0';
                                IOPORT1 &= ~0x08;

                                 if(strcmp((const char *)data1,(const char *) reccmd1) == 0 )
                                {
                                   
                                        IOPORT2 |= 0x80;
                                        tr_s = sizeof(cmd1) - 1;
                                        i = 0;
                                        do
                                        {

                                                
                                                SBUF_TX0 = cmd1[i];//ByteReceived;//0x01;

                                                do{status_uart = SP_STAT0;}

                                                while(!(status_uart & 0x08));
                                                tr_s --;
                                                i++;


                                        }
                                        while(tr_s);
                                        sts = 0;
                                        cntb = 0;
                                        IOPORT2 &= ~0x80;
                                }



                                  if(strcmp((const char *)data1,(const char *) reccmd2) == 0 )
                                {
                                    
                                        IOPORT2 |= 0x80;
                                        tr_s = sizeof(cmd2) - 1;
                                        i = 0;
                                        do
                                        {

                                                //if(cmd&0x01)
                                                SBUF_TX0 = cmd2[i];//ByteReceived;//0x01;

                                                do{status_uart = SP_STAT0;}

                                                while(!(status_uart & 0x08));
                                                tr_s --;
                                                i++;


                                        }
                                        while(tr_s);
                                        sts = 0;
                                        cntb = 0;
                                        IOPORT2 &= ~0x80;
                                }
                        }
                        else
                        {
                              if((sts==1) && (ByteReceived != 0x0D))
                              {
                                *(data1+ cntb) = ByteReceived;
                                cntb++ ;
                              }
                        }

                }
                
                if((ByteReceived == 0x23) && (ByteReceived != 0x0D))
               
                {


                        IOPORT1 = 0xF0;
                        sts = 2;

                        *(data2+ cntb) = ByteReceived;
                      
                        cntb++ ;
                        tr_s = sizeof(toend) - 1;

                        i = 0;
                        do
                        {

                                SBUF_TX0 = toend[i];//ByteReceived;//0x01;

                                do{status_uart = SP_STAT0;}
  
                                while(!(status_uart & 0x08));
                                tr_s --;
                                i++;

                        }
                        while(tr_s);
                }
                else
                {
                        if((sts==2) && (ByteReceived == 0x0D))
                        {
                                *(data2 + cntb) = '\0';

                                sscanf(  data2, "%1u%2u%1u%1u",&pref, &aa, &b, &dd );

                                if((aa==0x31) || (aa == 0x32))
                                {
                                       
                                        IOPORT2 |= 0x80;
                                        tr_s = sizeof(toend) - 1;

                                        i = 0;
                                        do
                                        {

                                           
                                                SBUF_TX0 = toend[i];//ByteReceived;//0x01;

                                                do{status_uart = SP_STAT0;}

                                                while(!(status_uart & 0x08));
                                                tr_s --;
                                                i++;


                                        }
                                        while(tr_s);
                                        sts = 0;
                                        cntb = 0;
                                    
                                        SBUF_TX0 = pref;//ByteReceived;//0x01;

                                        do{status_uart = SP_STAT0;

                                        while(!(status_uart & 0x08));

                                        SBUF_TX0 = aa;//ByteReceived;//0x01;

                                        do{status_uart = SP_STAT0;}

                                        while(!(status_uart & 0x08));

                                        SBUF_TX0 = b;//ByteReceived;//0x01;

                                        do{status_uart = SP_STAT0;}
                                       
                                        while(!(status_uart & 0x08));

                                        SBUF_TX0 = dd;//ByteReceived;//0x01;

                                        do{status_uart = SP_STAT0;}
                                       

                                        while(!(status_uart & 0x08));

                                }
                                else
                                {
                                        IOPORT2 |= 0x80;



                                        SBUF_TX0 = pref;//ByteReceived;//0x01;

                                        do{status_uart = SP_STAT0;}

                                        while(!(status_uart & 0x08));

                                        SBUF_TX0 = aa;//ByteReceived;//0x01;

                                        do{status_uart = SP_STAT0;}

                                        while(!(status_uart & 0x08));

                                        SBUF_TX0 = b;//ByteReceived;//0x01;

                                        do{status_uart = SP_STAT0;}

                                        while(!(status_uart & 0x08));

                                        SBUF_TX0 = dd;//ByteReceived;//0x01;

                                        do{status_uart = SP_STAT0;}

                                        while(!(status_uart & 0x08));

                                }
                
                                        sts = 0;
                                        cntb = 0;
                                        IOPORT2 &= ~0x80;

                        }
                        else
                        {
                              if((sts==2) && (ByteReceived != 0x0D))
                              {
                                  
                                *(data2+ cntb) = ByteReceived;
                                cntb++ ;
                              }
                        }

                        ///

                }


                if((ByteReceived == 0x40) && (ByteReceived != 0x0D))
                {
                        sts = 3;

                        *(data3+ cntb) = ByteReceived;
                     
                        cntb++ ;
                }
                else
                {
                        if((sts==3) && (ByteReceived == 0x0D))
                        {
                                *(data3 + cntb) = '\0';

                                sscanf(  data3, "%1u%2u%1u%1u", &pref, &aa, &b, &n, &d );

                                if((aa==0x31) || (aa == 0x32))
                                {

                                  
                                        IOPORT2 |= 0x80;
                                        tr_s = sizeof(toend) - 1;

                                        i = 0;
                                        do
                                        {

                                                SBUF_TX0 = toend[i];//ByteReceived;//0x01;

                                                do{status_uart = SP_STAT0;}

                                                while(!(status_uart & 0x08));
                                                tr_s --;
                                                i++;

                                        }
                                        while(tr_s);
                                        sts = 0;
                                        cntb = 0;
                                        IOPORT2 &= ~0x80;
                                }
                        }

                        else
                        {
                                if((sts==3) && (ByteReceived != 0x0D))
                                {
                                        *(data3+ cntb) = ByteReceived;
                                        cntb++ ;
                                }
                        }
                }

        }
        else
        {
                IOPORT2 &= ~0x80;
                IOPORT2 &= ~0x80;
                temp = 0;
        }

   }


}

При компиляции возникает следующая ошибка
Error[C119] C:\Program Files (x86)\CodeMaster-96\1_32_00\CMC-96\Inc\string.h(454,43): (CPP) Unclosed comment started in line 409

Ранее все работало, я просто добавил фукнционал и поменял весь main
Не могу отыскать следы этой ошибки, потому что в string.h я не лазил, и в main все вроде закрывается

редактор
Сообщения: 25
Зарегистрирован: 08 ноя 2016, 09:10

Re: Error[C119] Unclosed comment started in

Сообщение редактор » 18 мар 2022, 11:39

попробуйте заменить
///*(volatile short*)(adr) = 0x00;
на
// *(volatile short*)(adr) = 0x00;
возможно комбинация /* воспринимается как начало комментария.

Ответить

Вернуться в «Микроконтроллер 1874ВЕ7Т»

Пользователи онлайн

Сейчас этот форум просматривают: нет зарегистрированных пользователей и 1 гость